For Sale [USA-IL] Custom Build for Sale

Asking $1200. Prefer pickup, and willing to drive a little to facilitate a good transaction, but can also ship in US at buyer's expense.

Hi everyone, new member here in Chicago, IL. I'm trying to sell a custom board I made and its charging system. I kept it for awhile as it has been one of my favorite pieces of engineering work in college but I regularly bike around now, so I think it's time to part ways and give someone a decent deal on what I think is a good-quality build for a custom board. Roughly $2000 of material cost put into it.

-Charger Power Supply: MeanWell SE-1000-24
-Balance Charger: iCharger 3010B

- Batteries: 4x Turnigy nano-tech 5000mah 5S 25-50C LiPo (wired as 2 parallel pairs in series to create a 10S 10,000mah power source. The charger can balance charge the entire system at once.)
- Motors: 2x Turnigy Aerodrive SK3-6374-192kv
- ESC: Alien Power Systems 150A 2-12S Twin ESC
- Throttle Control: Wiiceiver (Nintendo Wii Nunchuck controlled)
- Anti-spark Power Switch
- Motor Plates + Truck Mounts from Alien Drive Systems
- Trucks: Caliber II
- Wheels: 5" Skike (will include some spare tires and tubes)
- 15:44 motor-to-wheel gear ratio with HTD gears and belts

Some personal touches:
- Battery voltage % indicator
- White headlights and red taillights
- 3 position light switch (flip it one direction and get lights continuously on, flip it the other direction and get flashing lights)
- Adjust the flashing lights between 1Hz and 25Hz using an adjustable dial on a handmade timer circuit
- The board side of the batteries are attached with adhesive-backed velcro, then the entire board bottom is covered in Gorilla Tape. Ideally there would be a hard case on the bottom, but the velcro+tape has held everything snugly together on city streets.

The ESC is currently programmed to keep max speed at 21-22 mph as that has been plenty fast enough for me. The buyer could reprogram it to full power and get it into mid-30's I believe, but I'm not sure I'd recommend it.

Let me know if you have any questions!